Products
Downloads
Product search
idSET-OTM oil separator alarm system
New! idSET-OTM is a measuring device for real-time measurement of oil layer thickness in oil separators.
LabkoNet | ATEX | IECEx
OMS-1 oil separator alarm
Oil separator alarm device for monitoring oil layer in an oil separator. It indicates when it is time to empty the oil separator.
LabkoNet | ATEX | IECEx | UKEX
GA-1 grease alarm
One sensor grease alarm for monitoring the thickness of the grease layer accumulating in a grease separator.
LabkoNet
GA-2 grease alarm
Two sensor grease alarm for monitoring the thickness of the grease layer accumulating in a grease separator.
LabkoNet
idSET-34 oil separator alarm
Easy to use oil separator alarm with four relays, one for each sensor and one for faults.
LabkoNet | ATEX | IECEx | UKEX
idOil-30 oil separator alarm
Up to three idOil sensors of any type can be connected polarity-free. Available also with 3G modem and in 12 V DC operation voltage.
LabkoNet | ATEX | IECEx | UKEX
idOil-D30 oil separator alarm
Control unit an be mounted in an electrical cabinet on DIN rails. Up to three idOil sensors of any type can be connected polarity-free.
LabkoNet | ATEX | IECEx | UKEX
idOil Solar oil separator alarm
Solar-powered alarm and communication unit for monitoring the levels of liquid hydrocarbon, sludge, or high levels in oil and sand separators, in locations where mains power is unavailable.
LabkoNet | ATEX | IECEx | UKEX
idOil sensors
idOil sensors are an integral part of the idOil oil separator alarm system and they are to be used with the idOil control units. idOil sensors are digital and polarity free.
ATEX | IECEx | UKEX
idOil one sensor systems
With the idOil one sensor alarm system, excessively high liquid levels, oil layer thickness or sludge layer thickness can be monitored. idOil alarm systems are available in complete packages.
LabkoNet | ATEX | IECEx | UKEX
idOil two sensor systems
With the idOil two sensor alarm system, excessively high liquid levels, oil layer thickness and sludge layer thickness can be monitored. idOil alarm systems are available in complete packages.
LabkoNet | ATEX | IECEx | UKEX
idOil three sensor systems
With the idOil three sensor alarm system, excessively high liquid levels, oil layer thickness and sludge layer thickness can be monitored. idOil alarm systems are available in complete packages.
LabkoNet | ATEX | IECEx | UKEX
idSET-34 LIQ system package
System package for detecting high liquid level. High liquid level sensor indicates when the liquid level in the oil separator rises excessively e.g. in an outlet blockage situation.
LabkoNet | ATEX | IECEx | UKEX
idOil-30 3G oil separator alarm
Delivered with a 3G data transfer module and antenna. Up to three idOil sensors of any type can be connected polarity-free.
LabkoNet | ATEX | IECEx | UKEX
idOil-30 Battery (3G) oil separator alarm
Alarm system for monitoring liquid levels in oil and sand separators. Up to three idOil sensors of any type can be connected polarity-free.
LabkoNet | ATEX | IECEx | UKEX
SET-1000 and SET/OSK2 Capacitive oil-on-water detector
Special version of SET/OS2 equipped with polypropylene floats to detect oil on water in pump sumps. The most common applications are inspection shafts and different kind of basins with altering liquid level.
ATEX | IECEx | UKEX
SET/OSK2 Sensor
Floating sensor for inspection shafts and different kind of basins with altering liquid level.
ATEX
Battery Box 10
Power supply for idOil-30 Battery and idOil-30 Battery 3G alarm devices.
LCJ1-1, LCJ1-2, LCJ1-3 Cable connectors
Used for cable extension between idOil control unit and idOil sensors. Cable connectors are oil resistant, IP68 and suitable for ATEX Zone 0.
ATEX | IECEx | UKEX
LCJ1-SK4 cable connector for OMS-1
Designed to extend sensor cables in potentially explosive atmospheres.
ATEX | IECEx | UKEX
LID-3300IP Ice Detector
Detect icing conditions to increase safety, enhance the productivity of wind turbines and extend their life cycle.
LabkoNet
Icing intensity estimate
Boost your wind park efficiency with new icing intensity estimate that meets the requirements for real-time ice warning equipment.
LabkoNet
Ice warning lights
Increase safety of the wind farm area by warning of the ice throw danger with a flashing light.
LabkoNet
Labcom 442 Communication unit
Labcom 442 communication unit is designed for the remote monitoring of measurements in industrial, domestic and environmental maintenance applications.
LabkoNet
Labcom 221
Labcom 221 is a battery-powered remote monitoring device with GPS positioning for remote monitoring of industry, water utilities and environmental care.
LabkoNet
LabkoNet Level
LabkoNet Level remote monitoring system optimises industrial processes and distribution chains.
LabkoNet
POP-22 EXI Level controller
Level measurement and control unit can be used to indicate level, control pumps and valves and to send alarms.
LabkoNet | ATEX | IECEx
SET/OELO2 sensor
Capacitive sensor which can be utilized for leak detection of oil, fuel, chemical, water, etc.
ATEX
PA/3W, PAH/3W capacitive level gauge
The capacitive tube sensors are typically used for low-conductive liquids, such as oils, fuels, alcohols and solvents, as well as for fresh water level measurement.
ATEX
DMU 08 Pressure sensor
Pressure sensor which meets both industrial and municipal water management requirements.
SET-1000 Control unit
One-channel level switch can be used as a controller of a level sensor located in potentially explosive atmosphere.
LabkoNet | ATEX | IECEx | UKEX
SET-2000 Control unit
Two-channel level switch that can be used as a controller of a level sensor located in potentially explosive atmosphere.
LabkoNet | ATEX | IECEx | UKEX
SET/SA2 Sensor
Special sensor for process mediums causing material build-up on the sensing element.
ATEX
SET/TSH2, SET/TSHS2 Sensor
SET/TSHS2 is a special sensor for viscous liquids. SET/TSH2 is a universal sensor for non-viscous liquids.
ATEX
SET/TSSH2, SET/TSSHS2 Sensor
Special sensor with adjustable mounting thread for non-viscous liquids having high temperatures. Can be utilized as high or low level detector or for detecting the interface between two liquids.
ATEX
Lokaset 20 Cesspool alarm
Reliable full alarm device for cesspool. Control of cesspool is made sure by conductive sensor and harmful overfill can be eliminated.
SET-61 Dry-boiling preventer
Dry-boiling guard to be used in closed boiler plants.
SET/J1 sensor
Conductive sensor
SET/LV sensor
When the sensor comes into contact with a conducting liquid the control unit will give an alarm.
Pointek CLS100
Compact 2-wire inverse frequency shift capacitance switch for level detection in constricted spaces, interfaces, solids, liquids, slurries and foam.
ATEX
Pointek CLS200 level switch
Versatile inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output.
ATEX
Pointek CLS300 level switch
Inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output.
ATEX
Nivocont KKH Conductive Level Switches
Low cost level switches
WBS 3000 water bottom sensor
Water bottom sensor works on the capacitive principle, which is ideal for detecting the interface between liquids with different densities and dielectric properties.
ATEX
