Level measurement

With Labkotec level measurement devices and technologies, you always stay informed about inventory levels and receive an immediate alert in the case of a leak. Our level measurement devices and technologies are used, for example, at fuel distribution points and in manufacturing, the energy industry and waterworks. 

Safety for business and the environment 

Real time data makes it possible to detect leaks and overfilling and react responsibly. Monitoring tank levels with reliable equipment ensures continuous operation, and it’s easy to order a new batch on time.  

There are less production disruptions when you can see the status of the silo or tank in real time. This ensures that your process runs around the clock, and that you will receive an alarm immediately if there is a leak or a machine malfunction. 

Report accurately and track in real time 

The Labkotec measurement system makes it easy to report accurately to the authorities and avoid additional costs. 

In waterworks, accurate monitoring of flow rates meets regulatory requirements, but can also help with billing and maintenance planning. You can quickly locate leaks when you monitor network flow rates in real time. 

Portable measuring devices are typically used to monitor the level and flow before and during construction project. 

 

Compatible with LabkoNet® – a flexible and easy to use remote monitoring system

Downloads

Trident monitoring system

Trident is a fuel level measurement monitor, which can also be used to control storage tanks. The properties of Trident make it extremely well suited for either commercial or non-commercial fuel storage applications. Principal applications include service stations, terminals, refineries,…

LabkoNet
Avainlippu
The versatile POP-22 EXI level measurement and control unit can be used to indicate level

POP-22 EXI Level controller

POP-22 EXI has all in one: LCD display, two relay outputs, one analog output, in-built Ex-barrier and programmability! It is easy, versatile, reliable, affordable and also approved according to ATEX Directive 2014/34/EU. The versatile POP-22 EXI level measurement and control…

ATEXLabkoNet
Avainlippu

WBS 3000 water bottom sensor

The WBS 3000 water bottom sensor works on the capacitive principle, which is ideal for detecting the interface between liquids with different densities and dielectric properties. Since the sensor contains no moving parts it is very longlasting, making it very…

ATEX
Avainlippu
SET/OELO2 sensor

SET/OELO2 sensor

SET/OELO2 is a capacitive sensor which can be utilized for leak detection of oil, fuel, chemical, water, etc. Typical applications include e.g. tank farms, boiler rooms and cellars. The sensitivity of the sensor is adjusted in the Labkotec SET control…

ATEX
Avainlippu

Lokaset 20 Cesspool alarm

Lokaset 20 is the reliable full alarm device for cesspool. This compact package saves time and worries with cesspool level control. Control of cesspool is made sure by conductive sensor. The system is reliable and proven. Harmful overfill can be…

Avainlippu

PA/3W, PAH/3W capacitive level gauge

The capacitive PA and PAH tube probes are typically used for low-conductive liquids, such as oils, fuels, alcohols and solvents, as well as for fresh water level measurement. The probe consists of a protective tube, which is made up of…

ATEX
Avainlippu
KAS/3W capacitive level gauge

KAS/3W capacitive level gauge

The KAS/3W wire sensor is intended for level measurement for dry powdery materials in metal tank. The measurement is based on the variation of the sensor’s capacitance as a counter electrode of the capacitor. Typical applications are cement, lime, sand…

Avainlippu
Capacitive rodtype sensor for viscous liquids in low tanks

SA/FEP/3W capacitive level probe

The SA/FEP/3W is a rodtype sensor intended for level measurement in low tanks and for viscous liquids. The measurement is based on the variation of the probe’s capacitance as a function of level. Typical applications include latex and corrosive media…

ATEX
Avainlippu
KAR/SA/3W capacitive level sensor

KAR/SA/3W capacitive level sensor

The KAR/SA/3W is a cable probe intended for level measurement in pressurised tanks and for aggressive media, such as ammonia. The materials of the wetted parts of the probe’s sensing element consist of PFA, PTFE and acid-proof steel AISI 316.…

ATEX
Avainlippu

DMU 08 Pressure sensor

The measuring device is the DMU 08 pressure sensor, which meets both industrial and municipal water management requirements. It has a robust design and is easy to install. The probe’s accuracy is ±0.35% of the measuring range.…

Meets both industrial and municipal water management requirements

DMU 08P microprosessor pressure sensor

The measuring device is the DMU 08P pressure sensor with a microprocessor, which meets both industrial and municipal water management requirements. It has a robust design and is easy to install. The sensor can be used to measure both drinking…