SET-1000 is a one-channel level switch. Typical applications are high level and low level alarms in liquid tanks, condensed water alarms, level control and alarms in oil, sand and grease separators. SET-1000 can be used as a controller of a…
Typical applications are high level and low level alarms in liquid tanks, condensed water alarms, level control and alarms in oil, sand and grease separators. Sensors: SET/TSH2 (TSHS2) SET/OSK2 SET/TSSH2 SET/OS2-O SET/OS2-V SET/SA2 SET/OELO2…
SET/OELO2 is a capacitive sensor which can be utilized for leak detection of oil, fuel, chemical, water, etc. Typical applications include e.g. tank farms, boiler rooms and cellars. The sensitivity of the sensor is adjusted in the Labkotec SET control…
SET/OS2 is a low-cost capacitive sensor for e.g. oil/water interface detection. The transmitter is cast in the sensor. Standard cable length is 5 m, oil-resisting cable 3×0,5 mm². Ambient temperature -25 C…+60 C.…
SET/SA2 is a special sensor for process mediums causing material build-up on the sensing element. Due to its rod-type construction with FEP-coating, SET/SA2 can be utilized in various applications in difficult circumstances, especially in the process and chemical industries. Ambient…
SET/TSHS2 is a special sensor for viscous liquids. The most common applications are e.g. high level or water interface alarm in grease or heavy/crude oil storage tanks. Equipped with a fork type counter electrode instead of a tube counter. SET/TSH2…
SET/TSSH2 is a special sensor with adjustable mounting thread for non-viscous liquids having high temperatures up to 120 °C and pressures up to 2 MPa. Can be utilized as high or low level detector or for detecting the interface between…
The capacitive PA and PAH tube probes are typically used for low-conductive liquids, such as oils, fuels, alcohols and solvents, as well as for fresh water level measurement. The probe consists of a protective tube, which is made up of…
The SA/FEP/3W is a rodtype sensor intended for level measurement in low tanks and for viscous liquids. The measurement is based on the variation of the probe’s capacitance as a function of level. Typical applications include latex and corrosive media…
The KAR/SA/3W is a cable probe intended for level measurement in pressurised tanks and for aggressive media, such as ammonia. The materials of the wetted parts of the probe’s sensing element consist of PFA, PTFE and acid-proof steel AISI 316.…
Pointek CLS100 is a compact 2-wire inverse frequency shift capacitance switch for level detection in constricted spaces, interfaces, solids, liquids, slurries and foam. Pointek CLS100’s short insertion length of 100 mm (4″) and versatility in various applications and in vessels…
Pointek CLS200 is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output, ideal for detection of liquids, solids, slurries, foam and interfaces. The digital version (with PROFIBUS PA) includes a display and provides additional…
The measuring device is the DMU 08 pressure sensor, which meets both industrial and municipal water management requirements. It has a robust design and is easy to install. The probe’s accuracy is ±0.35% of the measuring range.…
The measuring device is the DMU 08P pressure sensor with a microprocessor, which meets both industrial and municipal water management requirements. It has a robust design and is easy to install. The sensor can be used to measure both drinking…