Labkotec.fi » Alarm devices for oil, grease and sand separators
With Labkotec oil and grease separator alarms, you’ll know the need to empty the separators in advance. Alarms help your business operate responsibly. Labkotec oil separator alarms are used, for example, at fuel distribution points, on roads and at airports. Our grease separator alarmsare used inrestaurants.
Keep the soil and groundwater clean
The Labkotec oil separator alarm monitors 24/7 and detects if the separator needs to be emptied to prevent oil from being wasted or risking an overflow into the soil or groundwater. Oil separator alarms meet the requirements of EN 858-1 and -2. You can also fulfil your accounting responsibilities to the authorities for the operation and maintenance of the separator and alarm systems.
ATEX approved separator alarms
Our oil separator alarms are approved in accordance with the ATEX Directive 2014/34/EU, IECEx and some of the products are UKEX certified, so they are safe to use even in potentially explosive atmospheres.
Solar or battery-operated oil separator alarms
If mains supply is not available at the site, you can select a solar or battery-operated oil separator alarm. You can also use an alarm with an internal modem to send alarm messages.
Grease separator alarms for restaurants
Labkotec grease separator alarms support responsible operations by notifying you precisely when the separator needs to be emptied. By preventing grease build-up and blockages, you can avoid unexpected maintenance costs and unpleasant odours. Ensure uninterrupted operations and uphold high hygiene standards — especially critical in restaurant and food service environments.
All alarms in LabkoNet cloud service
You can connect the separator alarms to LabkoNet, which is a flexible and easy-to-use remote monitoring system. LabkoNet monitors 24/7 and transmits alarms immediately to the necessary partiesregardless of time and place.
Labkotec wall cabinets offer IP67 protection for separator alarm systems in humid, dusty, and splash-prone environments. Optional beacon and heater ensure reliable operation in all conditions. Ideal for industrial and outdoor use.
ATEX-certified floating sensor designed to detect ≥15 mm oil or hydrocarbon layers on water. Ideal for inspection shafts and basins with fluctuating liquid levels.
ATEX
The separator must be emptied in every 6 months (EN 858).
The function of an oil separator is easy to check by lifting it up, in which case the sensor should send an alarm. The sensor must be cleaned if it has an oil film when lifting from the separator. Sludge sensor can be tested in a same way.
Very likely the grease sensor is still dirty and needs to be cleaned.
SG1 grease sensor is lifted from separator in to the air, when the sensor should be alarming. HLL-1 grease sensor is put into water, when the sensor should be alarming. SG1 and HLL-1 sensors have to be in a same water for test to succeed.
