Oil terminals

idSET-OTM oil separator alarm system

New! idSET-OTM is a measuring device for real-time measurement of oil layer thickness in oil separators.

Labcom 442 Communication unit

Labcom 442 communication unit is designed for the remote monitoring of measurements in industrial, domestic and environmental maintenance applications.

Labcom 221

Labcom 221 is a battery-powered remote monitoring device with GPS positioning for remote monitoring of industry, water utilities and environmental care.

POP-22 EXI Level controller

Level measurement and control unit can be used to indicate level, control pumps and valves and to send alarms.

WBS 3000 water bottom sensor

Water bottom sensor works on the capacitive principle, which is ideal for detecting the interface between liquids with different densities and dielectric properties.

OMS-1 oil separator alarm

Oil separator alarm device for monitoring oil layer in an oil separator. It indicates when it is time to empty the oil separator.

idSET-34 oil separator alarm

Easy to use oil separator alarm with four relays, one for each sensor and one for faults.

idOil-30 oil separator alarm

Up to three idOil sensors of any type can be connected polarity-free. Available also with 3G modem and in 12 V DC operation voltage.

idOil-D30 oil separator alarm

Control unit an be mounted in an electrical cabinet on DIN rails. Up to three idOil sensors of any type can be connected polarity-free.

idOil Solar oil separator alarm

Solar-powered alarm and communication unit for monitoring the levels of liquid hydrocarbon, sludge, or high levels in oil and sand separators, in locations where mains power is unavailable.

idOil sensors

idOil sensors are an integral part of the idOil oil separator alarm system and they are to be used with the idOil control units. idOil sensors are digital and polarity free.

idOil one sensor systems

With the idOil one sensor alarm system, excessively high liquid levels, oil layer thickness or sludge layer thickness can be monitored. idOil alarm systems are available in complete packages.

idOil two sensor systems

With the idOil two sensor alarm system, excessively high liquid levels, oil layer thickness and sludge layer thickness can be monitored. idOil alarm systems are available in complete packages.

idOil three sensor systems

With the idOil three sensor alarm system, excessively high liquid levels, oil layer thickness and sludge layer thickness can be monitored. idOil alarm systems are available in complete packages.

idSET-34 LIQ system package

System package for detecting high liquid level. High liquid level sensor indicates when the liquid level in the oil separator rises excessively e.g. in an outlet blockage situation.

idOil-30 3G oil separator alarm

Delivered with a 3G data transfer module and antenna. Up to three idOil sensors of any type can be connected polarity-free.

idOil-30 Battery (3G) oil separator alarm

Alarm system for monitoring liquid levels in oil and sand separators. Up to three idOil sensors of any type can be connected polarity-free.

SET-1000 Control unit

One-channel level switch can be used as a controller of a level sensor located in potentially explosive atmosphere.

SET-2000 Control unit

Two-channel level switch that can be used as a controller of a level sensor located in potentially explosive atmosphere.

SET-1000 and SET/OSK2 Capacitive oil-on-water detector

Special version of SET/OS2 equipped with polypropylene floats to detect oil on water in pump sumps. The most common applications are inspection shafts and different kind of basins with altering liquid level.

SET/OELO2 sensor

Capacitive sensor which can be utilized for leak detection of oil, fuel, chemical, water, etc.

SET/OSK2 Sensor

Floating sensor for inspection shafts and different kind of basins with altering liquid level.

SET/OS2 Sensor

Capacitive sensor for e.g. oil/water interface detection.

SET/SA2 Sensor

Special sensor for process mediums causing material build-up on the sensing element.

SET/TSH2, SET/TSHS2 Sensor

SET/TSHS2 is a special sensor for viscous liquids. SET/TSH2 is a universal sensor for non-viscous liquids.

SET/TSSH2, SET/TSSHS2 Sensor

Special sensor with adjustable mounting thread for non-viscous liquids having high temperatures. Can be utilized as high or low level detector or for detecting the interface between two liquids.

Lokaset 20 Cesspool alarm

Reliable full alarm device for cesspool. Control of cesspool is made sure by conductive sensor and harmful overfill can be eliminated.

SET-61 Dry-boiling preventer

Dry-boiling guard to be used in closed boiler plants.

SET/J1 sensor

Conductive sensor

SET/LV sensor

When the sensor comes into contact with a conducting liquid the control unit will give an alarm.

PA/3W, PAH/3W capacitive level gauge

The capacitive tube sensors are typically used for low-conductive liquids, such as oils, fuels, alcohols and solvents, as well as for fresh water level measurement.

Pointek CLS100

Compact 2-wire inverse frequency shift capacitance switch for level detection in constricted spaces, interfaces, solids, liquids, slurries and foam.

Battery Box 10

Power supply for idOil-30 Battery and idOil-30 Battery 3G alarm devices.

LCJ1-1, LCJ1-2, LCJ1-3 Cable connectors

Used for cable extension between idOil control unit and idOil sensors. Cable connectors are oil resistant, IP68 and suitable for ATEX Zone 0.

Pointek CLS200 level switch

Versatile inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output.

LCJ1-SK4 cable connector for OMS-1

Designed to extend sensor cables in potentially explosive atmospheres.

Pointek CLS300 level switch

Inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output.

Nivocont KKH Conductive Level Switches

Low cost level switches

DMU 08 Pressure sensor

Pressure sensor which meets both industrial and municipal water management requirements.