Labcom 442 Communication unit
Labcom 442 communication unit is designed for the remote monitoring of measurements in industrial, domestic and environmental maintenance applications. Labcom 442 sends alarms and measurement results as text messages either directly to your mobile phone or to the LabkoNet service to be stored and distributed to other interested parties. You can easily modify the device
LabkoNet
Labcom 221
Labcom 221 is a battery-powered remote monitoring device with GPS positioning for remote monitoring of industry, water utilities and environmental care.
LabkoNet
LabkoNet Fuel
Not available for purchase.
Please contact Labkotec sales team.
LabkoNet
Labcom 200 Communication unit
Communication unit for remote monitoring of industrial and environmental measurement data.
LabkoNet
Labcom 220 Communication unit
Communication unit for remote monitoring of industrial and environmental measurement data.
LabkoNet
Labcom 800 Measurement and communication unit
Communication unit for use as a measurement and communication unit in telemetry applications.
LabkoNet
LabkoMax MPS-4 Level interface
Not available for purchase. Please contact Labkotec sales team.
LabkoNet
LabkoMax 7100MR probe
Not available for purchase. Please contact Labkotec sales team.
ATEX
POP-22 EXI Level controller
Level measurement and control unit can be used to indicate level, control pumps and valves and to send alarms.
LabkoNetATEXIECEx
Trident monitoring system
Not available for purchase.
Please contact Labkotec sales team.
LabkoNet
WBS 3000 water bottom sensor
Water bottom sensor works on the capacitive principle, which is ideal for detecting the interface between liquids with different densities and dielectric properties.
ATEX
SET-1000 Control unit
One-channel level switch can be used as a controller of a level sensor located in potentially explosive atmosphere.
LabkoNetATEXIECExUKEX
SET-2000 Control unit
Two-channel level switch that can be used as a controller of a level sensor located in potentially explosive atmosphere.
LabkoNetATEXIECExUKEX
SET/OELO2 sensor
Capacitive sensor which can be utilized for leak detection of oil, fuel, chemical, water, etc.
ATEX
SET/OSK2 Sensor
Floating sensor for inspection shafts and different kind of basins with altering liquid level.
ATEX
SET/OS2 Sensor
Capacitive sensor for e.g. oil/water interface detection.
ATEX
SET/SA2 Sensor
Special sensor for process mediums causing material build-up on the sensing element.
ATEX
SET/TSH2, SET/TSHS2 Sensor
SET/TSHS2 is a special sensor for viscous liquids. SET/TSH2 is a universal sensor for non-viscous liquids.
ATEX
SET/TSSH2, SET/TSSHS2 Sensor
Special sensor with adjustable mounting thread for non-viscous liquids having high temperatures. Can be utilized as high or low level detector or for detecting the interface between two liquids.
ATEX
Lokaset 20 Cesspool alarm
Reliable full alarm device for cesspool. Control of cesspool is made sure by conductive sensor and harmful overfill can be eliminated.
SET-61 Dry-boiling preventer
Dry-boiling guard to be used in closed boiler plants.
SET/J1 sensor
Conductive sensor
OMS-1 oil separator alarm device
Oil separator alarm device for monitoring oil layer in an oil separator. It indicates when it is time to empty the oil separator.
LabkoNetATEXIECExUKEX
idSET-34 oil separator alarm
New! Easy to use oil separator alarm with four relays, one for each sensor and one for faults.
LabkoNetATEXIECExUKEX
idOil-30 oil separator alarm
Up to three idOil sensors of any type can be connected polarity-free. Available also with 3G modem and in 12 V DC operation voltage.
LabkoNetATEXIECExUKEX
idOil-20 oil separator alarm
This product will be discontinued by the end of 2023. The replacing product is idSET-34 oil separator alarm.
LabkoNetATEXIECExUKEX
idOil-D30 oil separator alarm
Control unit an be mounted in an electrical cabinet on DIN rails. Up to three idOil sensors of any type can be connected polarity-free.
LabkoNetATEXIECExUKEX
idOil sensors
idOil sensors are an integral part of the idOil oil separator alarm system and they are to be used with the idOil control units. idOil sensors are digital and polarity free.
ATEXIECExUKEX
SET/LV sensor
When the sensor comes into contact with a conducting liquid the control unit will give an alarm.
MD-1 Converter
Not available for purchase. Please contact Labkotec sales team.
PA/3W, PAH/3W capacitive level gauge
The capacitive tube sensors are typically used for low-conductive liquids, such as oils, fuels, alcohols and solvents, as well as for fresh water level measurement.
ATEX
KAS/3W capacitive level gauge
Not available for purchase.
Please contact Labkotec sales team.
SA/FEP/3W capacitive level probe
Not available for purchase.
Please contact Labkotec sales team.
ATEX
KAR/SA/3W capacitive level sensor
Not available for purchase. Please contact Labkotec sales team.
ATEX
idOil one sensor systems
With the idOil one sensor alarm system, excessively high liquid levels, oil layer thickness or sludge layer thickness can be monitored. idOil alarm systems are available in complete packages.
LabkoNetATEXIECExUKEX
idOil two sensor systems
With the idOil two sensor alarm system, excessively high liquid levels, oil layer thickness and sludge layer thickness can be monitored. idOil alarm systems are available in complete packages.
LabkoNetATEXIECExUKEX
idOil three sensor systems
With the idOil three sensor alarm system, excessively high liquid levels, oil layer thickness and sludge layer thickness can be monitored. idOil alarm systems are available in complete packages.
LabkoNetATEXIECExUKEX
idOil-20 LIQ system package
This product will be discontinued by the end of 2023. The replacing product is idSET-34 LIQ system package.
LabkoNetATEXIECExUKEX
idOil-30 3G oil separator alarm
Delivered with a 3G data transfer module and antenna. Up to three idOil sensors of any type can be connected polarity-free.
LabkoNetATEXIECExUKEX
idOil-30 Battery (3G) oil separator alarm
Alarm system for monitoring liquid levels in oil and sand separators. Up to three idOil sensors of any type can be connected polarity-free.
LabkoNetATEXIECExUKEX
Pointek CLS100
Compact 2-wire inverse frequency shift capacitance switch for level detection in constricted spaces, interfaces, solids, liquids, slurries and foam.
ATEX
Battery Box 10
Power supply for idOil-30 Battery and idOil-30 Battery 3G alarm devices.
idOil Solar oil separator alarm
Solar-powered alarm and communication unit for monitoring the levels of liquid hydrocarbon, sludge, or high levels in oil and sand separators, in locations where mains power is unavailable.
LabkoNetATEXIECExUKEX
LCJ1-1, LCJ1-2, LCJ1-3 Cable connectors
Used for cable extension between idOil control unit and idOil sensors. Cable connectors are oil resistant, IP68 and suitable for ATEX Zone 0.
ATEXIECExUKEX
Pointek CLS200 level switch
Versatile inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output.
ATEX
SET-1000 and SET/OSK2 Capacitive oil-on-water detector
Special version of SET/OS2 equipped with polypropylene floats to detect oil on water in pump sumps. The most common applications are inspection shafts and different kind of basins with altering liquid level.
ATEXIECExUKEX
LCJ1-SK4 cable connector for OMS-1
Designed to extend sensor cables in potentially explosive atmospheres.
ATEXIECExUKEX
Pointek CLS300 level switch
Inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output.
ATEX
SET-2000 Hi Level/Oil alarm device with two sensors
Not available for purchase, replaced by idSET-34 LO.
Please contact Labkotec sales team.
ATEX
SET-2000 Oil/Sludge alarm device with two probes
Not available for purchase, replaced by idSET-34 OS.
Please contact Labkotec sales team.
ATEX
Nivocont KKH Conductive Level Switches
Low cost level switches
DMU 08 Pressure sensor
Pressure sensor which meets both industrial and municipal water management requirements.
LevelSET S alarm device
Not available for purchase, replaced by idOil-30 LOS.
Please contact Labkotec sales team.
ATEX
LabkoFlex 7100V/B sensor
Not available for purchase. Please contact Labkotec sales team.
ATEX
idSET-34 LIQ system package
System package for detecting high liquid level. High liquid level sensor indicates when the liquid level in the oil separator rises excessively e.g. in an outlet blockage situation.
LabkoNetATEXIECExUKEX