Other industrial applications

idSET-OTM oil separator alarm system

New! idSET-OTM is a measuring device for real-time measurement of oil layer thickness in oil separators.

LabkoNetATEXIECEx

Labcom 442 Communication unit

Labcom 442 communication unit is designed for the remote monitoring of measurements in industrial, domestic and environmental maintenance applications.

LabkoNet

Labcom 221

Labcom 221 is a battery-powered remote monitoring device with GPS positioning for remote monitoring of industry, water utilities and environmental care.

LabkoNet

LabkoNet Fuel

Not available for purchase.
Please contact Labkotec sales team.

LabkoNet

Labcom 200 Communication unit

Not available for purchase, replaced by Labcom 442.
Please contact Labkotec sales team.

LabkoNet

Labcom 220 Communication unit

Not available for purchase, replaced by Labcom 442.
Please contact Labkotec sales team.

LabkoNet

Labcom 800 Measurement and communication unit

Communication unit for use as a measurement and communication unit in telemetry applications.

LabkoNet

LabkoMax MPS-4 Level interface

Not available for purchase. Please contact Labkotec sales team.

LabkoNet

LabkoMax 7100MR probe

Not available for purchase. Please contact Labkotec sales team.

ATEX

POP-22 EXI Level controller

Level measurement and control unit can be used to indicate level, control pumps and valves and to send alarms.

LabkoNetATEXIECEx

Trident monitoring system

Not available for purchase.
Please contact Labkotec sales team.

LabkoNet

WBS 3000 water bottom sensor

Water bottom sensor works on the capacitive principle, which is ideal for detecting the interface between liquids with different densities and dielectric properties.

ATEX

OMS-1 oil separator alarm device

Oil separator alarm device for monitoring oil layer in an oil separator. It indicates when it is time to empty the oil separator.

LabkoNetATEXIECExUKEX

idSET-34 oil separator alarm

Easy to use oil separator alarm with four relays, one for each sensor and one for faults.

LabkoNetATEXIECExUKEX

idOil-30 oil separator alarm

Up to three idOil sensors of any type can be connected polarity-free. Available also with 3G modem and in 12 V DC operation voltage.

LabkoNetATEXIECExUKEX

idOil-D30 oil separator alarm

Control unit an be mounted in an electrical cabinet on DIN rails. Up to three idOil sensors of any type can be connected polarity-free.

LabkoNetATEXIECExUKEX

idOil-20 oil separator alarm

This product will be discontinued by the end of 2023. The replacing product is idSET-34 oil separator alarm.

LabkoNetATEXIECExUKEX

idOil Solar oil separator alarm

Solar-powered alarm and communication unit for monitoring the levels of liquid hydrocarbon, sludge, or high levels in oil and sand separators, in locations where mains power is unavailable.

LabkoNetATEXIECExUKEX

idOil sensors

idOil sensors are an integral part of the idOil oil separator alarm system and they are to be used with the idOil control units. idOil sensors are digital and polarity free.

ATEXIECExUKEX

idOil one sensor systems

With the idOil one sensor alarm system, excessively high liquid levels, oil layer thickness or sludge layer thickness can be monitored. idOil alarm systems are available in complete packages.

LabkoNetATEXIECExUKEX

idOil two sensor systems

With the idOil two sensor alarm system, excessively high liquid levels, oil layer thickness and sludge layer thickness can be monitored. idOil alarm systems are available in complete packages.

LabkoNetATEXIECExUKEX

idOil three sensor systems

With the idOil three sensor alarm system, excessively high liquid levels, oil layer thickness and sludge layer thickness can be monitored. idOil alarm systems are available in complete packages.

LabkoNetATEXIECExUKEX

idSET-34 LIQ system package

System package for detecting high liquid level. High liquid level sensor indicates when the liquid level in the oil separator rises excessively e.g. in an outlet blockage situation.

LabkoNetATEXIECExUKEX

idOil-30 3G oil separator alarm

Delivered with a 3G data transfer module and antenna. Up to three idOil sensors of any type can be connected polarity-free.

LabkoNetATEXIECExUKEX

idOil-30 Battery (3G) oil separator alarm

Alarm system for monitoring liquid levels in oil and sand separators. Up to three idOil sensors of any type can be connected polarity-free.

LabkoNetATEXIECExUKEX

SET-1000 Control unit

One-channel level switch can be used as a controller of a level sensor located in potentially explosive atmosphere.

LabkoNetATEXIECExUKEX

SET-2000 Control unit

Two-channel level switch that can be used as a controller of a level sensor located in potentially explosive atmosphere.

LabkoNetATEXIECExUKEX

SET-1000 and SET/OSK2 Capacitive oil-on-water detector

Special version of SET/OS2 equipped with polypropylene floats to detect oil on water in pump sumps. The most common applications are inspection shafts and different kind of basins with altering liquid level.

ATEXIECExUKEX

SET/OELO2 sensor

Capacitive sensor which can be utilized for leak detection of oil, fuel, chemical, water, etc.

ATEX

SET/OSK2 Sensor

Floating sensor for inspection shafts and different kind of basins with altering liquid level.

ATEX

SET/OS2 Sensor

Capacitive sensor for e.g. oil/water interface detection.

ATEX

SET/SA2 Sensor

Special sensor for process mediums causing material build-up on the sensing element.

ATEX

SET/TSH2, SET/TSHS2 Sensor

SET/TSHS2 is a special sensor for viscous liquids. SET/TSH2 is a universal sensor for non-viscous liquids.

ATEX

SET/TSSH2, SET/TSSHS2 Sensor

Special sensor with adjustable mounting thread for non-viscous liquids having high temperatures. Can be utilized as high or low level detector or for detecting the interface between two liquids.

ATEX

Lokaset 20 Cesspool alarm

Reliable full alarm device for cesspool. Control of cesspool is made sure by conductive sensor and harmful overfill can be eliminated.

SET-61 Dry-boiling preventer

Dry-boiling guard to be used in closed boiler plants.

SET/J1 sensor

Conductive sensor

SET/LV sensor

When the sensor comes into contact with a conducting liquid the control unit will give an alarm.

MD-1 Converter

Not available for purchase. Please contact Labkotec sales team.

PA/3W, PAH/3W capacitive level gauge

The capacitive tube sensors are typically used for low-conductive liquids, such as oils, fuels, alcohols and solvents, as well as for fresh water level measurement.

ATEX