Weather stations

LID-3300IP Ice Detector

Detect icing weather conditions to improve safety, optimise the productivity of wind turbines and extend their life cycle.

Icing intensity estimate

Enhance your wind park efficiency with our new icing intensity estimate that meets the requirements for real-time ice warning equipment.

Labcom 442 Communication unit

Labcom 442 communication unit is designed for the remote monitoring of measurements in industrial, domestic and environmental maintenance applications.

Labcom 221

Labcom 221 is a battery-powered remote monitoring device with GPS positioning for remote monitoring of industry, water utilities and environmental care.

Labcom 200 Communication unit

Not available for purchase, replaced by Labcom 442.
Please contact Labkotec sales team.

Labcom 220 Communication unit

Not available for purchase, replaced by Labcom 442.
Please contact Labkotec sales team.

Labcom 800 Measurement and communication unit

Communication unit for use as a measurement and communication unit in telemetry applications.

OMS-1 oil separator alarm device

Oil separator alarm device for monitoring oil layer in an oil separator. It indicates when it is time to empty the oil separator.

idSET-34 oil separator alarm

Easy to use oil separator alarm with four relays, one for each sensor and one for faults.

idOil-30 oil separator alarm

Up to three idOil sensors of any type can be connected polarity-free. Available also with 3G modem and in 12 V DC operation voltage.

idOil-D30 oil separator alarm

Control unit an be mounted in an electrical cabinet on DIN rails. Up to three idOil sensors of any type can be connected polarity-free.

idOil-20 oil separator alarm

This product will be discontinued by the end of 2023. The replacing product is idSET-34 oil separator alarm.

idOil Solar oil separator alarm

Solar-powered alarm and communication unit for monitoring the levels of liquid hydrocarbon, sludge, or high levels in oil and sand separators, in locations where mains power is unavailable.

idOil sensors

idOil sensors are an integral part of the idOil oil separator alarm system and they are to be used with the idOil control units. idOil sensors are digital and polarity free.

idOil-30 3G oil separator alarm

Delivered with a 3G data transfer module and antenna. Up to three idOil sensors of any type can be connected polarity-free.

idOil-30 Battery (3G) oil separator alarm

Alarm system for monitoring liquid levels in oil and sand separators. Up to three idOil sensors of any type can be connected polarity-free.

Battery Box 10

Power supply for idOil-30 Battery and idOil-30 Battery 3G alarm devices.

LCJ1-1, LCJ1-2, LCJ1-3 Cable connectors

Used for cable extension between idOil control unit and idOil sensors. Cable connectors are oil resistant, IP68 and suitable for ATEX Zone 0.

LCJ1-SK4 cable connector for OMS-1

Designed to extend sensor cables in potentially explosive atmospheres.