idSET-OTM oil separator alarm system
New! idSET-OTM is a measuring device for real-time measurement of oil layer thickness in oil separators.
New! idSET-OTM is a measuring device for real-time measurement of oil layer thickness in oil separators.
Labcom 442 communication unit is designed for the remote monitoring of measurements in industrial, domestic and environmental maintenance applications.
Labcom 221 is a battery-powered remote monitoring device with GPS positioning for remote monitoring of industry, water utilities and environmental care.
Level measurement and control unit can be used to indicate level, control pumps and valves and to send alarms.
Water bottom sensor works on the capacitive principle, which is ideal for detecting the interface between liquids with different densities and dielectric properties.
Oil separator alarm device for monitoring oil layer in an oil separator. It indicates when it is time to empty the oil separator.
Easy to use oil separator alarm with four relays, one for each sensor and one for faults.
Up to three idOil sensors of any type can be connected polarity-free. Available also with 3G modem and in 12 V DC operation voltage.
Control unit an be mounted in an electrical cabinet on DIN rails. Up to three idOil sensors of any type can be connected polarity-free.
Solar-powered alarm and communication unit for monitoring the levels of liquid hydrocarbon, sludge, or high levels in oil and sand separators, in locations where mains power is unavailable.
idOil sensors are an integral part of the idOil oil separator alarm system and they are to be used with the idOil control units. idOil sensors are digital and polarity free.
With the idOil one sensor alarm system, excessively high liquid levels, oil layer thickness or sludge layer thickness can be monitored. idOil alarm systems are available in complete packages.
With the idOil two sensor alarm system, excessively high liquid levels, oil layer thickness and sludge layer thickness can be monitored. idOil alarm systems are available in complete packages.
With the idOil three sensor alarm system, excessively high liquid levels, oil layer thickness and sludge layer thickness can be monitored. idOil alarm systems are available in complete packages.
System package for detecting high liquid level. High liquid level sensor indicates when the liquid level in the oil separator rises excessively e.g. in an outlet blockage situation.
Delivered with a 3G data transfer module and antenna. Up to three idOil sensors of any type can be connected polarity-free.
Alarm system for monitoring liquid levels in oil and sand separators. Up to three idOil sensors of any type can be connected polarity-free.
One-channel level switch can be used as a controller of a level sensor located in potentially explosive atmosphere.
Two-channel level switch that can be used as a controller of a level sensor located in potentially explosive atmosphere.
Special version of SET/OS2 equipped with polypropylene floats to detect oil on water in pump sumps. The most common applications are inspection shafts and different kind of basins with altering liquid level.
Special sensor for process mediums causing material build-up on the sensing element.
Reliable full alarm device for cesspool. Control of cesspool is made sure by conductive sensor and harmful overfill can be eliminated.
Dry-boiling guard to be used in closed boiler plants.
Conductive sensor
When the sensor comes into contact with a conducting liquid the control unit will give an alarm.
The capacitive tube sensors are typically used for low-conductive liquids, such as oils, fuels, alcohols and solvents, as well as for fresh water level measurement.
Compact 2-wire inverse frequency shift capacitance switch for level detection in constricted spaces, interfaces, solids, liquids, slurries and foam.
Power supply for idOil-30 Battery and idOil-30 Battery 3G alarm devices.
Used for cable extension between idOil control unit and idOil sensors. Cable connectors are oil resistant, IP68 and suitable for ATEX Zone 0.
Versatile inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output.
Designed to extend sensor cables in potentially explosive atmospheres.
Inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output.
Low cost level switches