Level measurement

Labkotec.fi » References » Level measurement

With Labkotec level measurement devices and technologies, you always stay informed about inventory levels and receive an immediate alert in the case of a leak. Our level measurement devices and technologies are used, for example, at fuel distribution points and in manufacturing, the energy industry and waterworks.

Safety for business and the environment

Real time data makes it possible to detect leaks and overfilling and react responsibly. Monitoring tank levels with reliable equipment ensures continuous operation, and it’s easy to order a new batch on time.

There are less production disruptions when you can see the status of the silo or tank in real time. This ensures that your process runs around the clock, and that you will receive an alarm immediately if there is a leak or a machine malfunction.

Report accurately and track in real time

The Labkotec measurement system makes it easy to report accurately to the authorities and avoid additional costs.

In waterworks, accurate monitoring of flow rates meets regulatory requirements, but can also help with billing and maintenance planning. You can quickly locate leaks when you monitor network flow rates in real time.

Portable measuring devices are typically used to monitor the level and flow before and during a construction project.

FAQ Success Stories

Downloads

POP-22 EXI Level controller

Level measurement and control unit can be used to indicate level, control pumps and valves and to send alarms.

LabkoNet | ATEX | IECEx

SET-1000 Control unit

One-channel level switch can be used as a controller of a level sensor located in potentially explosive atmosphere.

LabkoNet | ATEX | IECEx | UKEX

SET-2000 Control unit

Two-channel level switch that can be used as a controller of a level sensor located in potentially explosive atmosphere.

LabkoNet | ATEX | IECEx | UKEX

SET/OELO2 sensor

Capacitive sensor which can be utilized for leak detection of oil, fuel, chemical, water, etc.

ATEX

Lokaset 20 Cesspool alarm

Reliable full alarm device for cesspool. Control of cesspool is made sure by conductive sensor and harmful overfill can be eliminated.

PA/3W, PAH/3W capacitive level gauge

The capacitive tube sensors are typically used for low-conductive liquids, such as oils, fuels, alcohols and solvents, as well as for fresh water level measurement.

ATEX

DMU 08 Pressure sensor

Pressure sensor which meets both industrial and municipal water management requirements.

The most durable measure technique fully depends on application. It is advisable to choose a capacitive measurement if it is suitable for the application. Capacitive measurement has no moving parts, so the duration is often up to 20 years.

Radar is particularly suitable for a wide range of applications. The characteristics of the radar come into their own, especially in applications where there is foam, vapours, dust or no clear interface above a large surface.

Yes it is. Depending on the application’s conditions, the device’s operation can be checked on either the detachable device or the device installed in its application.

Yes, equipment can be made into customized entities.

Level measurements can be used to measure flow by means of dams, and in addition, it is used for all pipe and open channel measurements based on speed measurement. Ultrasonic or pressure measurement is most commonly used, and radar in certain applications.

In open channel flow measurements, a radar or pressure sensor can be used to measure the surface of foaming water. The pressure sensor can be installed by immersion or externally if the tube can be accessed from below.

This is the SET-61, the predecessor of which is the SET-60S. If the water level of the boiler can be lowered for testing, once the boiler is turned off, the sensor response can be tested without disconnecting the sensor. By lowering the water level in the hydrated boiler below the sensor, SET-61 provides an alarm.