Restaurants

Labcom 200 tiedonsiirtolaite

Labcom 200 Communication unit

Labcom 200 is designed for remote monitoring of industrial and environmental measurement data. Typical applications are e.g remote monitoring and control of tank levels, pumping stations, real estate alarms and ground water levels. Labcom 200 sends alarms and measurement data…

LabkoNet
Avainlippu
Labcom 220 Communication unit

Labcom 220 Communication unit

Labcom 220 Communication unit for remote monitoring of measurement data. Labcom 220 is designed for remote monitoring of industrial and environmental measurement data. Typical applications are e.g. remote monitoring and control of tank levels, pumping stations, real estate alarms and…

LabkoNet
Avainlippu

Labcom 800 Measurement and communication unit

Labcom 800 is designed for use as a measurement and communication unit in telemetry applications. It is typically used for monitoring the tank levels in industry and gas stations, and as an alarm device with sensors of environmental protection. Labcom…

LabkoNet
Avainlippu
The versatile POP-22 EXI level measurement and control unit can be used to indicate level

POP-22 EXI Level controller

POP-22 EXI has all in one: LCD display, two relay outputs, one analog output, in-built Ex-barrier and programmability! It is easy, versatile, reliable, affordable and also approved according to ATEX Directive 2014/34/EU. The versatile POP-22 EXI level measurement and control…

ATEXLabkoNet
Avainlippu
SET-1000 Central unit

SET-1000 Control unit

SET-1000 is a one-channel level switch. Typical applications are high level and low level alarms in liquid tanks, condensed water alarms, level control and alarms in oil, sand and grease separators. SET-1000 can be used as a controller of a…

ATEXIECExLabkoNet
Avainlippu
SET/OELO2 sensor

SET/OELO2 sensor

SET/OELO2 is a capacitive sensor which can be utilized for leak detection of oil, fuel, chemical, water, etc. Typical applications include e.g. tank farms, boiler rooms and cellars. The sensitivity of the sensor is adjusted in the Labkotec SET control…

ATEX
Avainlippu
SET/OS2

SET/OS2, SET/OSK2 Sensor

SET/OS2 is a low-cost capacitive sensor for e.g. oil/water interface detection. The transmitter is cast in the sensor. Standard cable length is 5 m, oil-resisting cable 3×0,5 mm². Ambient temperature -25 C…+60 C.…

ATEX
Avainlippu

SET/SA2 Sensor

SET/SA2 is a special sensor for process mediums causing material build-up on the sensing element. Due to its rod-type construction with FEP-coating, SET/SA2 can be utilized in various applications in difficult circumstances, especially in the process and chemical industries. Ambient…

ATEX
Avainlippu
SET/TSH2

SET/TSH2, SET/TSHS2 Sensor

SET/TSHS2 is a special sensor for viscous liquids. The most common applications are e.g. high level or water interface alarm in grease or heavy/crude oil storage tanks. Equipped with a fork type counter electrode instead of a tube counter. SET/TSH2…

ATEX
Avainlippu

SET/TSSH2, SET/TSSHS2 Sensor

SET/TSSH2 is a special sensor with adjustable mounting thread for non-viscous liquids having high temperatures up to 120 °C and pressures up to 2 MPa. Can be utilized as high or low level detector or for detecting the interface between…

ATEX
Avainlippu

Lokaset 20 Cesspool alarm

Lokaset 20 is the reliable full alarm device for cesspool. This compact package saves time and worries with cesspool level control. Control of cesspool is made sure by conductive sensor. The system is reliable and proven. Harmful overfill can be…

Avainlippu

PA/3W, PAH/3W capacitive level gauge

The capacitive PA and PAH tube probes are typically used for low-conductive liquids, such as oils, fuels, alcohols and solvents, as well as for fresh water level measurement. The probe consists of a protective tube, which is made up of…

ATEX
Avainlippu

Pointek CLS100

Pointek CLS100 is a compact 2-wire inverse frequency shift capacitance switch for level detection in constricted spaces, interfaces, solids, liquids, slurries and foam. Pointek CLS100’s short insertion length of 100 mm (4″) and versatility in various applications and in vessels…

ATEX
GA-2 grease alarm device

GA-2 grease alarm device

GA-2 alarm device is specially designed for grease separators. It indicates when it is time to empty the grease separator and thus prevents harmful grease emissions to the sewer system. Protecting our environment Versatile device for basic requirements Robust Designed…

LabkoNet
Avainlippu
GA-1 alarm device for monitoring grease layer in a grease separator

GA-1 grease alarm device

GA-1 is an alarm device for monitoring the thickness of the grease layer accumulating in a grease separator. The system consists of GA-1 control unit, GA-SG1 sensor and a cable joint. Protecting our environment Versatile device for basic requirements Robust…

LabkoNet

Pointek CLS200 level switch

Pointek CLS200 is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output, ideal for detection of liquids, solids, slurries, foam and interfaces. The digital version (with PROFIBUS PA) includes a display and provides additional…

ATEX

DMU 08 Pressure sensor

The measuring device is the DMU 08 pressure sensor, which meets both industrial and municipal water management requirements. It has a robust design and is easy to install. The probe’s accuracy is ±0.35% of the measuring range.…

Meets both industrial and municipal water management requirements

DMU 08P microprosessor pressure sensor

The measuring device is the DMU 08P pressure sensor with a microprocessor, which meets both industrial and municipal water management requirements. It has a robust design and is easy to install. The sensor can be used to measure both drinking…