Level switches and leakage monitoring

Labkotec.fi » Products » Level switches and leakage monitoring

FAQ

Downloads

idOil-30 oil separator alarm

Up to three idOil sensors of any type can be connected polarity-free. Available also with 3G modem and in 12 V DC operation voltage.

LabkoNet | ATEX | IECEx | UKEX

SET-1000 Control unit

One-channel level switch can be used as a controller of a level sensor located in potentially explosive atmosphere.

LabkoNet | ATEX | IECEx | UKEX

SET-2000 Control unit

Two-channel level switch that can be used as a controller of a level sensor located in potentially explosive atmosphere.

LabkoNet | ATEX | IECEx | UKEX

SET-1000 and SET/OSK2 Capacitive oil-on-water detector

Special version of SET/OS2 equipped with polypropylene floats to detect oil on water in pump sumps. The most common applications are inspection shafts and different kind of basins with altering liquid level.

ATEX | IECEx | UKEX

SET/OELO2 sensor

Capacitive sensor which can be utilized for leak detection of oil, fuel, chemical, water, etc.

ATEX

SET/OSK2 Sensor

Floating sensor for inspection shafts and different kind of basins with altering liquid level.

ATEX

SET/OS2 Sensor

Capacitive sensor for e.g. oil/water interface detection.

ATEX

SET/SA2 Sensor

Special sensor for process mediums causing material build-up on the sensing element.

ATEX

SET/TSH2, SET/TSHS2 Sensor

SET/TSHS2 is a special sensor for viscous liquids. SET/TSH2 is a universal sensor for non-viscous liquids.

ATEX

SET/TSSH2, SET/TSSHS2 Sensor

Special sensor with adjustable mounting thread for non-viscous liquids having high temperatures. Can be utilized as high or low level detector or for detecting the interface between two liquids.

ATEX

Lokaset 20 Cesspool alarm

Reliable full alarm device for cesspool. Control of cesspool is made sure by conductive sensor and harmful overfill can be eliminated.

SET-61 Dry-boiling preventer

Dry-boiling guard to be used in closed boiler plants.

SET/J1 sensor

Conductive sensor

SET/LV sensor

When the sensor comes into contact with a conducting liquid the control unit will give an alarm.

Pointek CLS100

Compact 2-wire inverse frequency shift capacitance switch for level detection in constricted spaces, interfaces, solids, liquids, slurries and foam.

ATEX

Pointek CLS200 level switch

Versatile inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output.

ATEX

Pointek CLS300 level switch

Inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output.

ATEX

Nivocont KKH Conductive Level Switches

Low cost level switches

Test-button activates the buzzer alarm, led lights, and relays, so the sensor function can not be tested with the test button.

Both relays change their status when it alerts, but the relay 1 can be restored by pressing the test button. This should be taken into account if further alarms are connected to the control unit because the system thinks the alarm has been removed if it has been reset with the test button. Relay 2 monitors the alarm status and does not return until the alarm is cleared.

The SET-OELO2 sensor cannot be used in outdoor applications, as humidity can cause unnecessary alarms. Only dry interior is acceptable.

Yes, you can, the instructions can be found in the user manual.